Approx. Rs 1,253 / PieceGet Latest PriceProduct Details:
|Use||Masonry Drilling, RCC Pillar Drilling, Concrete Drilling|
|Drill Dia Size||Less than 50mm, 75-100mm, 50-75mm, 100+ mm, All|
Approx. Rs 1,753 / Unit(s)Get Latest PriceSpray Gun is designed to paint the surface with:
Approx. Rs 1,053 / Piece(s)Get Latest PriceSDS+ Zentro Hammer Drill Bit are designed for drilling all types of masonry. The head design allows for exacting drilling and will even drill through reinforcement steel. The design means that these bits are amongst the best available, for fast clean drilled holes. All Sizes available in sds plus, sds max, 11E, Hex shank, etc.
Approx. Rs 30 / PieceGet Latest Price
Grinding and finishing of welds
Deburring, rust removal and snagging
Suitable for most ferrous & non-ferrous materials, Wood, Glass. Flap discs is suitable for light stock removal, blending and finishing all in one application. It grind like a depressed center wheel and finish like a fibre disc polish paper, helping to reduce process time and lower total grinding costs.
Used for grinding, buffing, polishing, sanding, finishing Wood, Metal and more.
Available Sizes and grits:
4" X 24#
4" X 36#
4" X 46#
4" X 60#
4" X 80#
4" X 120#
5" X 36#
5" X 46#
5" X 60#
5" X 80#
5" X 120#
7" All Grits
Approx. Rs 4,253 / PieceGet Latest Price
Air Stucco Cement Plaster Sprayer Gun Wall Mortar
Stucco Sprayer Before the hand-held Stucco Sprayer, concrete contractors who wanted to work vertically had to settle for one of two extremes - a large, costly pump, requiring a crew of four to six, or hand-stacking. This Sprayer fills a niche between the two, giving contractors a right-sized option for shotcreting small to medium-sized jobs.
This sprayer is a bucket-sized hopper perforated with multiple holes 3/4 inch in diameter. The user simply connects the hopper to an air hose and compressor, scoops the shotcrete mix into the hopper and starts to spray through the holes.
More air can help throw the mix harder onto a wall. Multiple sprayers can be connected to the same compressor.
Because this Stucco Sprayer is filled by scooping the mix from a wheelbarrow, there are no hoses to clog, eliminating a common source of irritation for shotcreters. If a piece of aggregate lodges in a hole in the hopper, it can be easily removed by hand. The sprayer can be used with aggregates up to 5/16 inch. Scheid recommends using a mix "thick enough to stay in the hopper when scooped, but thin enough to spray through the jets easily when the compressed air is turned on." A trial spray should be used to determine optimum water content.
You can use it to blow shotcrete up instead of throwing it up by hand when you need to patch or feather a spot after the ready-mix truck has moved on. It is also useful for small areas where it would be difficult to run a mixer and hoses.
For contractors working on large, high-volume installations, the Stucco Sprayer is a useful accessory or tool for augmenting a pump system. On smaller-scale projects, it may eliminate the need for the pump. Decorative concrete contractors might find the sprayer useful for vertical stamped concrete, artistic wall finishes, stucco and GFRC.
The hand-held Sprayer reduces labor costs associated with both hand-stacking and pumping. On smaller jobs it mechanizes a highly labor-intensive, time-consuming process. For larger jobs it reduces the crew size required to shoot concrete and offers the flexibility to set the work pace and start and stop work as required.
The Sprayer can also be used with other building techniques, such as straw-bale, earth-bag, insulated-panel and thin-shell or ferrocement construction. The mason, first used it to apply plaster to a straw-bale house. They claims that can empty a wheelbarrow full of plaster in four or five minutes, double or triple the speed of troweling the material by hand. You can use this concrete Sprayers on projects around the country to spray clay, lime and gypsum plasters as well as cement-based stucco. They are much easier to transport than a full-size pump system, and at a cost of just a few Rupees each (excluding the compressor, which is sold separately), and can afford to keep several on hand.
Its also called as Tirolessa sprayer
With this spray gun contractors have an option for spraying concrete that falls between the extremes of hand application and large-scale pumping.
Approx. Rs 3,421 / pcGet Latest Price
The best mixer for mixing stirring of paint, chemicals, tile cement, structure plaster, concrete, putty, filler, Flooring Adhesives, Grout, Coatings, Self-leveling Compounds and other Cementitious Materials.
Ideal for stirring of resin, paints and adhesives at high speeds
The stainless steel mixing blade and shaft will not rust
360° rotatable D-handle makes comfortable operation
High-torque Motors with Specially Designed Gears – provide maximum power. Mix quantities from 1 gallon to 290 pounds, including aggregate and other materials.
Helical Paddles – Mix from the bottom up, eliminating injection of air for an optimum blend. Other paddles available.
Power input : 800 wblade diameter: 160 mm
No load speed (RPM): 550
Net weight: 3.5 kg
Approx. Rs 353 / Piece(s)Get Latest PriceThis flat point breaker chisel set is designed for use with the breaker hammer. This breaker hammer chisel set has a flat blade for cutting concrete, asphalt or masonry and bull point chisel for heavy duty concrete breaking. Constructed of rugged chrome alloy steel, this durable chisel set includes a flat point chisel, bull point chisel and storage case for easy transport to any job.
Approx. Rs 110 / SetGet Latest PriceSuitable for:
Approx. Rs 321 / PieceGet Latest PriceSuitable for:
Approx. Rs 53 / PieceGet Latest Price
All Ball Bearing, Needle Bearing and Pendulam Bearing related to Power Tools Machinery available with us.
Hitachi, Ideal, Bosch, Electrex, Planet Power, Stanley, Black & Decker, Dewalt, Kulkarni KPT, Ryobi, Makita, Jepson, AEG, Atlas Copco, LG, Nippon, Neutron, Metabo, Eastman, CUMI, JK and other chinese model
Spare Parts as well as repairing done at our premises.
Approx. Rs 921 / PieceGet Latest PriceProduct Details:
Approx. Rs 110 / Piece(s)Get Latest Price
Cup Type Wire Brush "twisted" S.no Size / Thd / Type
1 2-1/2" X M10 Twisted
2 3" X M10 Twisted
3 3" X M14 Twisted
4 4" X M14 Twisted
5 4" X M14 Double Twisted Cup Type Wire Brush "crimped"
1 2-1/2" X M10 Crimped
2 3" X M10 Crimped
3 3" X M14 Crimped
2 4" X M14 Crimped Circular Type Wire Brush "twisted"
1 3" [75mm] Twisted
2 4" [100mm] Twisted
3 5" [125mm] Twisted Circular Type Wire Brush "crimped"
1 4" [100mm] Crimped
2 5" [125mm] Crimped
3 7" [180mm] Crimped Circular Type Wire Brush (for Drill / Die Grinder)
1 1"x 6mm Cir Crimped
2 1-1/2"x 6mm Cir-crimped St. Type Wire Brush (for Drill / Die Grinder)
1 1" To 3" Crimp 6pc Set 2 2" X 6mm Crimped 3 2" X 6mm Twisted
Approx. Rs 253 / PieceGet Latest PriceSuitable for:
Approx. Rs 53 / PairGet Latest PriceCarbon Brush for all power tools available
Approx. Rs 53 / PieceGet Latest PriceSpindle for all power tools machine available
Approx. Rs 21 / Piece(s)Get Latest Price4" X 24#A
Explore More Products